|
|
 | | |
| |  | Cleaning
and lubricating devices LUB90
Technical data:
Work air pressure: .3-0.6Mpa
Air consume: 60 L/min
Outside
dimensions: 190*415*223mm
Weight: 2.7kg
Working
procedure:
1)Blowing scraps
High-speed air stream forms negative
pressure vacuum in the crevice of handpiece inside the cavity, blowing away the
impurities from inside the pipes and crevices.
2)Wash by rinse liquid
Rinse
liquid runs with air -stream in to crevices at negative pressure, watering away
the dirt.
3)Puffing
Blow dry the remnants inside the cavity of the handset
turbine.
4)Lubricating
Lubricant enters negative -pressured crevices and
carries out all-around lubrication.
5)Puffing
Blow away surplus lubricant
,spreading oil film evenly over exletree bearings and wind wheel axis.
6)Finishing
Now
the bearings ,wind wheel and pipes have been rinsed and lubricated and can be
sealed for sterilization.
|
| |
|
